Hover

2009 VersaDrill V-100NG Drilling Rig

$450,000.00

OR BEST OFFER
Mounted to a 2009 Peterbilt 348 6 x 6 AWD with 19,732 miles
Cummins (350 HP)
GVWR = 54,600 lbs
9-ft 4-in (2,850mm) with high flotation, low ground pressure tires
Overall length = 40-ft (12.19m)
Overall “derrick up” height = 45-ft (13.72m)
Overall width = 8-ft (2,440mm) with standard wheels
11,200 hours
Low tare weight 40,000 lbs
Suited for large diameter “wash” drill holes and deep wire line cored “exploration” holes
Main winch 18,000 lbs single line pull configured to be “two lined” (36,000lb hook load).
Wire-line / sand-line winch 4,000lbs single line pull 2,500′ capacity
DHD lubricator 7-gallon capacity (removable)
Mud pump Gardner Denver 5-1/2 x 8 duplex piston type hydraulic driven
Water injection / coring pump FMC bean pump 25 GPM capacity
Tool boxes – large tool box under deck, tool box mounted on deck behind right side of cab
Feed system (patented) cylinder feed through gear track design. Pullback 40,000lbs. Pull-down 18,000lbs. Travel speed up 0 to 300’/min. Down 0 to 261’/min. Drill feed 29’/min.
Derrick, 10″x16″ tubular Derrick construction with 40′ overall length, 26′ top head travel 55,000lbs rating (no Derrick crown load).
Transfer case single output, full power transfer case road / PTO shift from truck cab.
Hydraulics mounted on 2 hole gear box, truck engine / transfer case powered feed, winch, auxiliary and set-up functions are powered by 2 axial piston load sense pumps.
Rotation is a closed loop circuit powered by a variable displacement piston pump.
Cooling hydraulic oil cooler mounted on deck.
Feed system (patented) hydraulic cylinder / sliding gear track design, provides tremendous power (40klbs pullback), requiring less maintenance than conventional system with chains and sprockets or cables and sheaves.
Top head drive A variable 2-speed / torque, floating head provides smooth operation and helps the operator recognize specific formations while drilling. Top head hydraulically slides to the side, (off hole) for convenience of setting casing up to Range 2 length (34′, 10.36m).
Top head rotation 2 motor combination (2 option) planetary / spur gear
4 speeds / torques
0 to 172 rpm, 52,000 ft lbs torque
0 to 230 rpm, 39,000 ft lbs. torque
0 to 221 rpm, 4,379 ft lbs. torque
0 to 500 rpm, 1,938 ft lbs torque
Leveling Jacks
2 front-mounted 36″ stroke leveling jacks and.
2 rear-mounted 36″ stoke leveling jacks with independent controls
Split centraliser table centraliser base plate is split in half, rear half retracts hydraulically, and the front half swings out to accommodate casing and tools. Also includes an air-operated drill pipe holding wrench and hydraulic breakout wrench.
Controls left hand mounted, functionally grouped gauges and controls with twin fold-up platforms
No warranty (sold as is)
Located in Luling, TX
Call Larry Simmons: (512) 995-9007 or email: hazeletttransportation@gmail.com

Categories: 2009, Drilling Rig, Peterbilt, Texas, Versadrill

2009 VersaDrill V-100NG Drilling Rig

Related products